Paper
29 December 1998 Surface structure analysis of paper based on confocal laser scanning microscopy (CLSM) imaging: aiming at the prediction of printability for wood-containing paper
Per Gunnar Auran
Author Affiliations +
Proceedings Volume 3520, Three-Dimensional Imaging, Optical Metrology, and Inspection IV; (1998) https://doi.org/10.1117/12.334330
Event: Photonics East (ISAM, VVDC, IEMB), 1998, Boston, MA, United States
Abstract
The printability of newsprint and liner is addressed through the analysis of CLSM images. The surface topography and porous structure of the paper are physical properties heavily correlated with the paper's formation, and, hence, important factors affecting the printability of the paper. The surface 3D structure of the paper is measured by using topographic CLSM images from which the pore size distribution can be estimated using image analysis. The experimental results have both been compared to a theoretical model of the cross-sectional area of void volumes in paper and also with paper physics measurements, specially related to the offset print-through problem. Good correlations have been found, and results so far are promising, but still there is a need for improved analysis of the 3D structure of paper, both on the measurement and modeling side.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Per Gunnar Auran "Surface structure analysis of paper based on confocal laser scanning microscopy (CLSM) imaging: aiming at the prediction of printability for wood-containing paper", Proc. SPIE 3520, Three-Dimensional Imaging, Optical Metrology, and Inspection IV, (29 December 1998); https://doi.org/10.1117/12.334330
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D modeling

Image analysis

3D image processing

Physics

3D metrology

Microscopes

Confocal laser scanning microscopy

Back to Top