Paper
26 July 1999 Performance of 300-mm lithography tools in a pilot production line
John G. Maltabes, Alain B. Charles, Steffen R. Hornig, Thorsten Schedel, Dietmar Ganz, Sebastian Schmidt
Author Affiliations +
Abstract
Semiconductor 300 is the first pilot manufacturing facility for 300mm wafers in the world. This company is a joint venture between Siemens and Motorola, formed for the purpose of developing a 300mm manufacturing tool set. The pilot line contains a full compliment of tools for DRAM manufacturing. This paper discusses the performance of the initial 300mm lithography tool set installed in our pilot line in Dresden, Germany. The product used for evaluating and debugging the tool set is a 0.25-micron ground rule 64 Meg DRAM. This was chosen for the ability to easily benchmark against 200mm DRAM manufacturing data. We have produced several lots of wafers with measurable yield. These lots have produced data on overlay, CD and run to run performance of the lithography tools on actual product. We have data on resist coating, and develop uniformity. With several lithography tools installed we have generated a large amount of mix and match data. In addition several challenges for successful lithography have surfaced related entirely to the increase in wafer size. Film, etch, polish and thermal non-uniformity have impacted the throughput and performance of the lithography tools. The installation of the first integrated 300mm pilot line has also produced data on the impact larger wafer size has on tool logistics, for example fab layout, installation schedules and wafer and lot transport. While technical data is always important, the main reason for converting to 300mm is economic. We now have preliminary data on the comparison of 200 tools to 300mm tools in terms of footprint, throughput, and productivity gains for equivalent square centimeters of silicon. With this data we can start to make preliminary recommendations for 300mm manufacturing tools.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John G. Maltabes, Alain B. Charles, Steffen R. Hornig, Thorsten Schedel, Dietmar Ganz, and Sebastian Schmidt "Performance of 300-mm lithography tools in a pilot production line", Proc. SPIE 3679, Optical Microlithography XII, (26 July 1999); https://doi.org/10.1117/12.354360
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Scanners

Lithography

Manufacturing

Deep ultraviolet

Semiconductors

Thin film coatings

RELATED CONTENT

Current state of 300 mm lithography in a pilot line...
Proceedings of SPIE (September 03 1999)
Characterization of low-viscosity photoresist coating
Proceedings of SPIE (June 29 1998)
Advanced mix and match using a high NA i line...
Proceedings of SPIE (July 05 2000)
Is lithography ready for 300 mm?
Proceedings of SPIE (August 18 2000)

Back to Top