Paper
2 August 1999 Techniques for improving buried mine detection in thermal IR imagery
Author Affiliations +
Abstract
We describe sensor-based and signal-processing-based techniques for improving the detection of buried land mines in thermal IR imagery. Results of experimental studies using MWIR and LWIR imaging systems are reported. Thermal clutter due to surface reflected sunlight and skylight are investigated and shown to be the dominant clutter component for both MWIR and LWIR imagery collected during daylight hours. A sensor-based clutter reduction technique, spectral differencing, was considered and found to provide some benefit. The temporal evolution of thermal signatures was investigated. The imagery are found to have near-Gaussian statistics, and therefore the deflection coefficient is a valid measure of detectability. The deflection coefficient for some buried mines was found to improve with time after sunset. In addition, the LWIR band appears to offer some advantages in detection. Clutter mitigation via signal processing is also explored using an 'estimator-classifier' technique in which target-related parameters are estimated from the data and detected with a classifier. The theoretical basis of the method is discussed. MWIR and LWIR imagery are used to illustrate both the sensor-based and signal-processing-based techniques.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ibrahim Kursat Sendur and Brian A. Baertlein "Techniques for improving buried mine detection in thermal IR imagery", Proc. SPIE 3710, Detection and Remediation Technologies for Mines and Minelike Targets IV, (2 August 1999); https://doi.org/10.1117/12.357009
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mining

Sensors

Land mines

Long wavelength infrared

Mid-IR

Thermography

Cameras

Back to Top