Paper
7 September 1999 Improving the ion current density distribution from a gridless ion source by optimizing the orientation
Author Affiliations +
Abstract
A Mark II gridless ion source and HCES5000 hollow cathode electron source are used for ion assisted deposition (IAD) of dense coatings. It is possible to check the ion beam profile with a beam probe translated at a right angle to the beam axis. By rotating the probe it is possible to eliminate the contribution form charge exchange ions and to estimate the mean free path of the energetic ions. The beam intensity is expressed as a polynomial in cosine to the angle between the ion track and the beam axis and we derive mathematical equations to describe the result in distribution of ion current density on a flat and on an umbrella shaped substrate holder. A grid of target points is introduced immediately in front of the holder an in turn we aim the ion gun towards each of these. In each case, we calculate the mean ion current density and the variance across the rotating substrate holder. Finally, we use the obtained maps to optimize the orientation of the ion gun.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Henrik Fabricius "Improving the ion current density distribution from a gridless ion source by optimizing the orientation", Proc. SPIE 3738, Advances in Optical Interference Coatings, (7 September 1999); https://doi.org/10.1117/12.360068
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ions

Ion beams

Solids

Oxygen

Argon

Laser beam diagnostics

Optical coatings

Back to Top