Paper
14 April 2000 High-power propagation effects in different designs of a Faraday isolator
Author Affiliations +
Abstract
Absorption of laser radiation in the optical element leads to depolarization resulting in limitation of isolation ratio. In order to suppress this self-induced depolarization two new optical designs were recently suggested. They utilize two 22.5 degree Faraday rotators and a half wave plate or reciprocal rotator between them. Both schemes allow an increase in isolation ratio at the same beam power. However all other parameters of the isolators were not investigated. All three designs are compared from the viewpoint of the first pass through the isolator. We derive equations for power losses, amplitude and phase distortions as a function of the laser beam power. Both crystal and glass magneto-optical media are investigated. It is shown that the scheme with reciprocal rotator is the best from the viewpoint of the first pass parameters as well as from the viewpoint of the isolation ratio. The results obtained for a Gaussian beam in the present and previous studies are generalized for the case of super Gaussian and flat intensity distribution as well. It is shown that the flat- shaped beam induces the weakest distortions and the Gaussian one induces the strongest ones.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Efim A. Khazanov "High-power propagation effects in different designs of a Faraday isolator", Proc. SPIE 3927, Optical Pulse and Beam Propagation II, (14 April 2000); https://doi.org/10.1117/12.382068
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical isolators

Polarization

Gaussian beams

Polarizers

Birefringence

Glasses

Absorption

Back to Top