Paper
20 July 2000 Effect of Gemini primary mirror position relative to the lateral support on mirror figure
Author Affiliations +
Abstract
The Gemini primary mirror support incorporates a system of hydraulic whiffletrees to carry the mirror weight and define its position. The six orthogonal kinematic degrees of freedom are controlled by six hydraulic zones--three axial, two lateral, plus a transverse lateral. By varying the fluid volumes in these hydraulic zones the mirror position can be adjusted in all six degrees of freedom. Because of the finite lengths of the linkages that connect the mirror to the lateral supports, any shift in mirror position changes the amplitudes and directions of the applied forces with a resulting effect on the static balance and mirror figure. These effects have been calculated for mirror translations and rotations in all six degrees of freedom, resulting in predictions of the changes in the axial and lateral support forces and in the mirror figure. This paper describes the modeling as well as experimental verification of the results.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Myung K. Cho and Larry M. Stepp "Effect of Gemini primary mirror position relative to the lateral support on mirror figure", Proc. SPIE 4003, Optical Design, Materials, Fabrication, and Maintenance, (20 July 2000); https://doi.org/10.1117/12.391507
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

Gemini Observatory

Monochromatic aberrations

Optical alignment

Active optics

Spherical lenses

RELATED CONTENT

OAJ 2.6m survey telescope optical alignment and on sky...
Proceedings of SPIE (August 09 2016)
Active optics at UKIRT
Proceedings of SPIE (August 25 1998)
Prime focus coma corrector for the MMT with off the...
Proceedings of SPIE (August 16 2000)

Back to Top