Laser processes for precise microfabrication of magnetic disk-drive components

Andrew C. Tam

doi:10.1117/12.405732

6 November 2000 Laser processes for precise microfabrication of magnetic disk-drive components

Andrew C. Tam

Proceedings Volume 4088, First International Symposium on Laser Precision Microfabrication; (2000) https://doi.org/10.1117/12.405732
Event: First International Symposium on Laser Precision Microfabrication (LPM2000), 2000, Omiya, Saitama, Japan

Abstract

The technique of laser micro-processing has recently found several important and widespread applications in the manufacturing of disk-drive components. Examples provided here include the cleaning of surface contaminants, the formation of nano-bumps on disk surfaces for controlled surface texturing or for making glide height standards, and the micro-bending of magnetic head sliders for flight-height controls. Short-pulsed laser irradiation at suitable wavelength, fluence, and incidence direction can be used to clean off particulate and organic-film contaminants from surfaces of critical components, for example, the slider and the disk. Controlled disk texturing is needed to alleviate the problem of stiction which occurs when the disk stop spinning and the super smooth slider comes into stationary contact with the super smooth disk. A compact laser operating at high pulse repetition rate can be used to produce a low-stiction racetrack composed of typically a million nano-bumps. This can be done both for NiP/aluminum disks, or for glass disks. Single isolated bump with a specified height for providing height-standard can also be tailor-made. Very recently, we have developed a 'laser curvature adjust technique' and implemented it into production of magnetic head sliders. Here, microscopic adjustments of the curvature of air bearing surface of sliders can be produced by suitable laser scribing at the back side of the ceramic slider.

Citation Download Citation

Andrew C. Tam "Laser processes for precise microfabrication of magnetic disk-drive components", Proc. SPIE 4088, First International Symposium on Laser Precision Microfabrication, (6 November 2000); https://doi.org/10.1117/12.405732

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available