Transient light-induced refractive index change made by laser microfabrication in nitroaniline-doped PMMA film

Kazuhiko Yamasaki; Saulius Juodkazis; Mitsuru Watanabe; Shigeki Matsuo; Kenji Kamada; Koji Ohta; Hiroaki Misawa

doi:10.1117/12.405736

6 November 2000 Transient light-induced refractive index change made by laser microfabrication in nitroaniline-doped PMMA film

Kazuhiko Yamasaki, Saulius Juodkazis, Mitsuru Watanabe, Shigeki Matsuo, Kenji Kamada, Koji Ohta, Hiroaki Misawa

Author Affiliations +

Proceedings Volume 4088, First International Symposium on Laser Precision Microfabrication; (2000) https://doi.org/10.1117/12.405736
Event: First International Symposium on Laser Precision Microfabrication (LPM2000), 2000, Omiya, Saitama, Japan

Abstract

We report the observation of high light-induced change in refractive index (recognizable by observation in conventional microscope) in PMMA film doped with an optically non-linear dye 2-nitroaniline (NO₂(C₆H₄)NH₂ abbreviated as 2NA). The optically altered micrometer-sized regions were fabricated by single-shot radiation of 120 fs laser pulses into doped PMMA film using high numerical aperture 1.3 and high magnification x100 objective lens. The doping of films can be achieved in a wide range of 2NA concentrations (up to 40 wt%) without precipitation. This allows to control a storage time of an optically altered region up to one month by the adjusting the energy of the femtosecond (fs) recording pulse at 800 nm. Typical recording energy was 10-80 nJ/pulse at the point of irradiation. Total recovery of transmission of the PMMA2NA film was confirmed by optical transmission measurements in a microscope. The light induced damage threshold (LIDT) (for permanent damage) was increased more than by four times (up to 40 nJ/pulse) when 2NA doping were ca.1e wt%. While the LIDT for transient damage was decreased by 1.5-2 times. Total optical recovery was observed single exponential with decay time of ca. 0.5-1 minute for moderate irradiation intensities (0.1xLIDT of permanent damage). The damage induced with at the higher intensities lasts up to a month, but the recovery was not total (residual transmission changes were observable). The phenomenon can be applied for the optical memory, photonic crystal, and micro-mechanical applications. The underlying mechanism of the phenomenon is discussed in terms of anelastic (alpha) and (beta) -relaxation (polymer backbone and side chain relaxation, respectively).

Citation Download Citation

Kazuhiko Yamasaki, Saulius Juodkazis, Mitsuru Watanabe, Shigeki Matsuo, Kenji Kamada, Koji Ohta, and Hiroaki Misawa "Transient light-induced refractive index change made by laser microfabrication in nitroaniline-doped PMMA film", Proc. SPIE 4088, First International Symposium on Laser Precision Microfabrication, (6 November 2000); https://doi.org/10.1117/12.405736

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE