Paper
3 August 2001 Field study on moving force identification
Hung-tin Tommy Chan, Tak Hung Yung, S. S. Law
Author Affiliations +
Abstract
A field measurement to validate a moving force identification method was carried out on an existing prestressed concrete highway bridge with a span length of 28 m. The test bridge is located at Ma Tau Wai, Kowloon, Hong Kong. A heavy 2-axle truck with known axle loads was used as a control vehicle. Besides the control vehicle, axle load data of in-service vehicles were also collected. The bridge responses acquired for the identification were indirectly measured using strain gauges. Results show that dynamic axle loads induced from both control and in-service vehicles can be identified indicating the method is valid for identification of moving forces.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hung-tin Tommy Chan, Tak Hung Yung, and S. S. Law "Field study on moving force identification", Proc. SPIE 4337, Health Monitoring and Management of Civil Infrastructure Systems, (3 August 2001); https://doi.org/10.1117/12.435606
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bridges

Vehicle control

Sensors

Time division multiplexing

Data acquisition

Roads

Wheatstone bridges

Back to Top