Ultrafast laser ablation of dielectrics employing temporally shaped femtosecond pulses

Razvan Stoian; Mark Boyle; Andreas Thoss; Arkadi Rosenfeld; David Ashkenasi; Georg Korn; Eleanor E. B. Campbell; Ingolf V. Hertel

doi:10.1117/12.456853

25 February 2002 Ultrafast laser ablation of dielectrics employing temporally shaped femtosecond pulses

Razvan Stoian, Mark Boyle, Andreas Thoss, Arkadi Rosenfeld, David Ashkenasi, Georg Korn, Eleanor E. B. Campbell, Ingolf V. Hertel

Author Affiliations +

Proceedings Volume 4426, Second International Symposium on Laser Precision Microfabrication; (2002) https://doi.org/10.1117/12.456853
Event: Second International Symposium on Laser Precision Micromachining, 2001, Singapore, Singapore

Abstract

Dielectric materials exposed to ultrashort laser radiation have evidenced individualized paths to deposit the energy into the lattice. Electronic and thermal mechanisms competing in the process of material removal depend on the efficiency of the electrostatic energy accumulation on the surface due to photoionization, as well as on the lattice heating which follows the electron-phonon coupling. The electrostatic surface break-up is a fast, sub-picosecond process, while thermal mechanisms start to dominate on a longer, picosecond time scale given by the electron-lattice equilibration and phase transformation time. The Coulomb- explosion induced ion ejection due to surplus charge accumulated on the surface during the photoionization process is significant only in dielectrics while in semiconductors and metals an efficient neutralization occurs. The significance of the different channels in dielectric materials can be reduced or enhanced by using laser pulses which are modulated on a time scale characteristic for the above mentioned mechanisms. Thus, amplified temporally-shaped pulses, double peaks, or pulse trains with a separation below 1 ps can have a significant effect on the quality of micromachining of transparent materials. The energy deposition can be modulated in such a way that the first pulse of properly chosen energy leads to a softening of the material associated with the onset of heating, thus changing the coupling conditions for the next pulses. This leads to less residual stress accumulation, cleaner structures, and opens the way for a material dependent optimization process.

Citation Download Citation

Razvan Stoian, Mark Boyle, Andreas Thoss, Arkadi Rosenfeld, David Ashkenasi, Georg Korn, Eleanor E. B. Campbell, and Ingolf V. Hertel "Ultrafast laser ablation of dielectrics employing temporally shaped femtosecond pulses", Proc. SPIE 4426, Second International Symposium on Laser Precision Microfabrication, (25 February 2002); https://doi.org/10.1117/12.456853

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available