Paper
11 July 2002 Compression of PZT-5H piezoelectric ceramic at constant electric field: investigation of energy absorption mechanism
Author Affiliations +
Abstract
This paper presents an experimental and analytical investigation into the mechanical behavior of PZT-5H piezoelectric ceramic. The materia is subjected to cyclic uniaxial compressive stress at a constant electric field bias. The damping characteristics such as fraction of energy absorbed and elastic modulus are evaluated as a function of bias electric field. Increasing the positive electric field increases the specific damping and decreases the elastic modulus. The trend is reversed when the electric field becomes sufficiently high to inhibit the domain wall motion by the mechanical stresses. Measured specific damping values vary form 0.18 to 0.46 depending on the stress amplitude and bias electric field. The corresponding secant modulus varies from 79 to 24 Gpz. The optimum electric field values increase as the stress amplitude increases because the positive electric field and the compressive stress counteract each other in terms of domain wall motion. An analytical model shows that the material's response is proportional to the volume fraction of the domains available for switching and the domain wall pressure difference between positive electric field and compressive stress.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavel M. Chaplya and Gregory Paul Carman "Compression of PZT-5H piezoelectric ceramic at constant electric field: investigation of energy absorption mechanism", Proc. SPIE 4699, Smart Structures and Materials 2002: Active Materials: Behavior and Mechanics, (11 July 2002); https://doi.org/10.1117/12.474967
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Absorption

Composites

Polarization

Switching

Data modeling

Motion models

RELATED CONTENT


Back to Top