Paper
19 June 2003 Glass processing using femtosecond and nanosecond pulsed lasers
Arzu M. Ozkan, Leonard R. Migliore
Author Affiliations +
Abstract
Laser processing of glass components is of significant commercial interest for the optoelectronics and telecommunications industries. Several fundamentally different interactions are employed to produce active components: after generating optical waveguides and gratings inside glass, external features must be machined in the modules to allow light to couple into the functional regions. In this paper, we present laser processing techniques using microsecond, nanosecond, and femtosecond lasers for surface and sub-surface glass modification. A regeneratively amplified Ti-Sapphire laser operating at a near-IR wavelength with femtosecond pulses and a 250 kHz repetition rate is used to generate 3-D optical waveguides and Bragg gratings in glass and silica substrates. Surface structures, mainly groove geometries, are generated with a diode-pumped solid-state nanosecond pulsed UV laser operating at 266 nm, a Q-switched CO2 laser operating at 9.25 μm, a CO2 laser operating at 10.6 μm and the femtosecond pulsed laser operating at 800 nm. The material interactions are examined with respect to the differences in time scale and the appropriateness of each laser type for particular processes.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Arzu M. Ozkan and Leonard R. Migliore "Glass processing using femtosecond and nanosecond pulsed lasers", Proc. SPIE 4978, Commercial and Biomedical Applications of Ultrafast Lasers III, (19 June 2003); https://doi.org/10.1117/12.478586
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Femtosecond phenomena

Gas lasers

Pulsed laser operation

Silica

Ultraviolet radiation

Glasses

Laser processing

Back to Top