Paper
26 June 2003 Generating sub-30-nm polysilicon gates using PECVD amorphous carbon as hardmask and anti-reflective coating
Wei Liu, David Mui, Thorston Lill, May Dongmei Wang, Christopher Bencher, Michael Kwan, Wendy Yeh, Takeaki Ebihara, Toshihiro Oga
Author Affiliations +
Abstract
A PECVD deposited carbon hardmask is combined with dielectric anti-reflective coating (DARC) for the patterning of sub-90nm lines with 248nm lithography. Using this CVD dual layer stack, <1% reflectivity control is demonstrated for both 248nm and 193nm lithography. The film stack is tested with an etch integration scheme to reduce polysilicon gate critical dimension (CD). The dual layer stack can be defined with less than 100nm thick photoresist. Because of the minimal resist required to open the stack, this film stack enables an integration scheme that extends conventional photoresist trim processes up to 70% of the starting line width. In addition to conventional trim process, a resistless carbon mask trim process is investigated to further shrink the gate critical dimension. The results show that the carbon hardmask has greater than 6:1 etch selectivity to polysilicon, enabling the extension of the resist trimming technique to generate sub-30nm structures using 248nm lithography.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Liu, David Mui, Thorston Lill, May Dongmei Wang, Christopher Bencher, Michael Kwan, Wendy Yeh, Takeaki Ebihara, and Toshihiro Oga "Generating sub-30-nm polysilicon gates using PECVD amorphous carbon as hardmask and anti-reflective coating", Proc. SPIE 5040, Optical Microlithography XVI, (26 June 2003); https://doi.org/10.1117/12.485532
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications and 15 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Carbon

Photoresist materials

Lithography

Photomasks

193nm lithography

Critical dimension metrology

Back to Top