Paper
18 November 2003 CO2 laser annealing with NiTi thin films deposited by sputtering
Author Affiliations +
Proceedings Volume 5063, Fourth International Symposium on Laser Precision Microfabrication; (2003) https://doi.org/10.1117/12.540464
Event: Fourth International Symposium on Laser Precision Microfabrication, 2003, Munich, Germany
Abstract
It has been proved that NiTi shape memory alloy thin film is the best one for micro actuators as compared with the others, e.g., electrostatic, electromagnetic and piezoelectric thin films. If the deposition of NiTi thin films on silicon wafers is carried out at room temperature, the resultant thin films are normally amorphous without shape memory. Subsequent annealing in a high vacuum chamber is required for re-crystallization. In this paper, we present an alternative annealing approach, namely by CO2 laser. After laser annealing, optical microscope, X-ray diffraction (XRD) and atomic force microscope (AFM) were applied to characterize the NiTi thin films. Strong austenite/martensite lattice structures were observed by XRD. The relationship between the surface roughness of the annealed NiTi thin film and temperature was obtained using AFM. The results indicate that the CO2 laser annealed NiTi thin films are with shape memory.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Q. He, Weiming Huang, Minhui Hong, Tow Chong Chong, Yongqi Fu, and Hejun Du "CO2 laser annealing with NiTi thin films deposited by sputtering", Proc. SPIE 5063, Fourth International Symposium on Laser Precision Microfabrication, (18 November 2003); https://doi.org/10.1117/12.540464
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thin films

Annealing

Carbon dioxide lasers

Sputter deposition

Thin film deposition

Radium

Surface roughness

Back to Top