Paper
18 November 2003 Time-resolved measurement of surface displacement in excimer laser ablation of Si
Toshihiko Ooie, Shinsuke Asada, Isamu Miyamoto
Author Affiliations +
Proceedings Volume 5063, Fourth International Symposium on Laser Precision Microfabrication; (2003) https://doi.org/10.1117/12.540497
Event: Fourth International Symposium on Laser Precision Microfabrication, 2003, Munich, Germany
Abstract
The mechanism for removal of a single-crystal silicon in laser drilling using a KrF excimer laser was investigated. A time-resolved interference analysis was carried out to measure the surface profile of the Si during and after laser irradiation at a laser fluence in the range of 4 - 11 J/cm2. The 2nd harmonic output of a Q-switched Nd:YAG laser, the pulse duration of which was 10 ns, was used as the light source of the interferometer. The volume change of Si by melting and thermal expansion was directly observed. The formation and the growth of a sharp projection surrounding the laser-irradiated area was also observed during and after irradiation.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Toshihiko Ooie, Shinsuke Asada, and Isamu Miyamoto "Time-resolved measurement of surface displacement in excimer laser ablation of Si", Proc. SPIE 5063, Fourth International Symposium on Laser Precision Microfabrication, (18 November 2003); https://doi.org/10.1117/12.540497
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Excimer lasers

Pulsed laser operation

Laser irradiation

Semiconductor lasers

Nd:YAG lasers

Phase shifts

Back to Top