Electronic circuitry development in a micropyrotechnic system for micropropulsion applications

Manuel Puig-Vidal; Jaime Lopez; Pere Miribel; Enric Montane; Jose M. Lopez-Villegas; Josep Samitier; Carole Rossi; Thierry Camps; Maxime Dumonteuil

doi:10.1117/12.501504

24 April 2003 Electronic circuitry development in a micropyrotechnic system for micropropulsion applications

Manuel Puig-Vidal, Jaime Lopez, Pere Miribel, Enric Montane, Jose M. Lopez-Villegas, Josep Samitier, Carole Rossi, Thierry Camps, Maxime Dumonteuil

Author Affiliations +

Proceedings Volume 5116, Smart Sensors, Actuators, and MEMS; (2003) https://doi.org/10.1117/12.501504
Event: Microtechnologies for the New Millennium 2003, 2003, Maspalomas, Gran Canaria, Canary Islands, Spain

Abstract

An electronic circuitry is proposed and implemented to optimize the ignition process and the robustness of a microthruster. The principle is based on the integration of propellant material within a micromachined system. The operational concept is simply based on the combustion of an energetic propellant stored in a micromachined chamber. Each thruster contains three parts (heater, chamber, nozzle). Due to the one shot characteristic, microthrusters are fabricated in 2D array configuration. For the functioning of this kind of system, one critical point is the optimization of the ignition process as a function of the power schedule delivered by electronic devices. One particular attention has been paid on the design and implementation of an electronic chip to control and optimize the system ignition. Ignition process is triggered by electrical power delivered to a polysilicon resistance in contact with the propellant. The resistance is used to sense the temperature on the propellant which is in contact. Temperature of the microthruster node before the ignition is monitored via the electronic circuitry. A pre-heating process before ignition seems to be a good methodology to optimize the ignition process. Pre-heating temperature and pre-heating time are critical parameters to be adjusted. Simulation and experimental results will deeply contribute to improve the micropyrotechnic system. This paper will discuss all these point.

Citation Download Citation

Manuel Puig-Vidal, Jaime Lopez, Pere Miribel, Enric Montane, Jose M. Lopez-Villegas, Josep Samitier, Carole Rossi, Thierry Camps, and Maxime Dumonteuil "Electronic circuitry development in a micropyrotechnic system for micropropulsion applications", Proc. SPIE 5116, Smart Sensors, Actuators, and MEMS, (24 April 2003); https://doi.org/10.1117/12.501504

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available