Evaluation of a photon-counting x-ray imaging detector based on microchannel plates for mammography applications

Polad M. Shikhaliev; Tong Xu; Sabee Molloi

doi:10.1117/12.535476

6 May 2004 Evaluation of a photon-counting x-ray imaging detector based on microchannel plates for mammography applications

Polad M. Shikhaliev, Tong Xu, Sabee Molloi

Author Affiliations +

Proceedings Volume 5368, Medical Imaging 2004: Physics of Medical Imaging; (2004) https://doi.org/10.1117/12.535476
Event: Medical Imaging 2004, 2004, San Diego, California, United States

Abstract

Experimental prototype of a photon counting scanning slit X-ray imaging system is being evaluated for potential application in digital mammography. This system is based on a recently developed and tested “edge-on” illuminated Microchannel Plate (MCP) detector. The MCP detectors are well known for providing a combination of capabilities such as direct conversion, physical charge amplification, pulse counting, high spatial and temporal resolution, and very low noise. However, their application for medical imaging was hampered by their low detection efficiency. This limitation was addressed using an “edge-on” illumination mode for MCP. The current experimental prototype was developed to investigate the imaging performance of this detector concept for digital mammography. The current prototype provides a 60 mm field of view, 200 kHz count rate with 20% non-paralysable dead time and >7 lp/mm limiting resolution. A 0.3 mm focal spot W target X-ray tube was used for image acquisition. The detector noise is 0.3 count/pixel for 50x50 micron pixels. The count rate of the current prototype is limited by the delay line readout electronics, which causes long scanning times (minutes) and high tube loading. This problem will be addressed using multichannel ASIC electronics for clinical implementation. However, the current readout architecture is adequate for evaluation of the performance parameters of the new detector concept. It is very simple and provides a maximum intrinsic resolution of 28 micron FWHM. The prototype was evaluated using resolution, contrast detail and breast Phantoms. The MTF and DQE of the system are being evaluated at different tube voltages. The design parameters of a scanning multiple slit mammography system are being evaluated. It is concluded that a photon counting, quantum limited and virtually scatter free digital mammography system can be developed based on the proposed detector.

Citation Download Citation

Polad M. Shikhaliev, Tong Xu, and Sabee Molloi "Evaluation of a photon-counting x-ray imaging detector based on microchannel plates for mammography applications", Proc. SPIE 5368, Medical Imaging 2004: Physics of Medical Imaging, (6 May 2004); https://doi.org/10.1117/12.535476

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available