Paper
1 September 2004 1310-nm single-mode grating-outcoupled surface-emitting semiconductor lasers with a detuned second-order grating
Taha Masood, Steve Patterson, Nuditha V. Amarasinghe, Scott McWilliams, Duy Phan, Darren Lee, Gary A. Evans, Jerome K. Butler
Author Affiliations +
Abstract
Single-frequency grating outcoupled surface emitting (GSE) semiconductor lasers emitting at 1310 nm with output powers exceeding 5.25 mW into a multi-mode fiber, threshold currents below 13 mA and with > 30 dB side-mode suppression ratios are reported. These lasers consist of a 400 μm long horizontal cavity, and a 15 μm long second-order outcoupler grating sandwiched between 200 μm long first-order distributed Bragg reflector (DBRs) gratings. Higher output powers can be achieved with longer outcoupler gratings. These GSE lasers operate at 3.125 Gbps and have a full-width at half-maximum (FWHM) beam divergence of 5 x 12 degrees.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Taha Masood, Steve Patterson, Nuditha V. Amarasinghe, Scott McWilliams, Duy Phan, Darren Lee, Gary A. Evans, and Jerome K. Butler "1310-nm single-mode grating-outcoupled surface-emitting semiconductor lasers with a detuned second-order grating", Proc. SPIE 5452, Semiconductor Lasers and Laser Dynamics, (1 September 2004); https://doi.org/10.1117/12.545943
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Distributed Bragg reflectors

Laser damage threshold

Multimode fibers

Reflectivity

Etching

Optical design

RELATED CONTENT

GaInAsSb AlGaAsSb single mode DFB lasers for gas sensing...
Proceedings of SPIE (December 15 1999)
SCH-SQW semiconductor lasers
Proceedings of SPIE (January 20 2005)
Limits of high-modulation bandwidth of VCSELs
Proceedings of SPIE (January 31 2005)
True-blue InGaN laser for pico size projectors
Proceedings of SPIE (February 15 2008)

Back to Top