Paper
10 November 2004 Numerical simulation of modal gain in electrically pumped organic semiconductor lasers
Author Affiliations +
Abstract
In this article, a model to calculate the modal gain in organic laser diode structures is presented. A single layer design is considered to investigate the dependence of the gain on power density, charge carrier mobility and thickness of the active layer. We show that unequal charge carrier mobilities are detrimental and that there is an optimum active layer thickness of approximately 200 nm, if different devices are compared on the basis of equal power density. Neglecting all losses, the highest calculated gain is 0.7/cm for a power density of P=50 kW/cm2 in our MEH-PPV like model material. Furthermore, the influence of absorption by polarons is quantified. We show that the cross section for this process has to be at least 20 times smaller than the cross section for stimulated emission in order to achieve net gain in the most favourable case that was considered.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christof Pflumm, Christian Karnutsch, Martina Gerken, and Uli Lemmer "Numerical simulation of modal gain in electrically pumped organic semiconductor lasers", Proc. SPIE 5519, Organic Light-Emitting Materials and Devices VIII, (10 November 2004); https://doi.org/10.1117/12.560944
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Electrons

Excitons

Polarons

Semiconductor lasers

Diffusion

Organic semiconductors

Back to Top