Reduction of radial CD errors and Cr loading effects in 90-nm binary NCAR mask process through chrome etch DOE

Jian Ma; Chaoyang Li; Larry Bassist; Matthew Pekney; Nathan Wilcox; Jeff Farnsworth; Edward Lauder; B. Krishnakumar

doi:10.1117/12.568423

6 December 2004 Reduction of radial CD errors and Cr loading effects in 90-nm binary NCAR mask process through chrome etch DOE

Jian Ma, Chaoyang Li, Larry Bassist, Matthew Pekney, Nathan Wilcox, Jeff Farnsworth, Edward Lauder, B. Krishnakumar

Author Affiliations +

Proceedings Volume 5567, 24th Annual BACUS Symposium on Photomask Technology; (2004) https://doi.org/10.1117/12.568423
Event: Photomask Technology, 2004, Monterey, California, United States

Abstract

A new chrome etch system was acquired and implemented to manufacture 65 nm node critical level masks. The etch performance of FEP 171, ZEP 7000, NEB 22, and REAP 200 resist systems in this new chrome etch system was evaluated. The critical dimension (CD) uniformity, etch bias, and etch linearity of this new etch system relative to the older generation etch system is presented. Implementation of the new etch system resulted in a 40-60 nm reduction in etch bias with no degrade in CD uniformity performance. In addition, it was found that the etch contribution to CD linearity was reduced by 50%. Detailed characterization of both macroloading and microloading etch effects was performed and showed substantial improvement relative to the previous generation etch system. The change in chrome etch rate as a function of etch area was reduced by 50%, improving mean to target CD performance on new designs. Implementation of the new etch system has enabled achievement of CD and defect density performance requirements for 65 nm node mask manufacturing. The results presented in this paper were collected during the process development phase and are not necessarily representative of the final optimized process.

Citation Download Citation

Jian Ma, Chaoyang Li, Larry Bassist, Matthew Pekney, Nathan Wilcox, Jeff Farnsworth, Edward Lauder, and B. Krishnakumar "Reduction of radial CD errors and Cr loading effects in 90-nm binary NCAR mask process through chrome etch DOE", Proc. SPIE 5567, 24th Annual BACUS Symposium on Photomask Technology, (6 December 2004); https://doi.org/10.1117/12.568423

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available