Paper
8 October 2004 Microfabrication of overhanging shape using LCD microstereolithography
Gohki Oda, Takashi Miyoshi, Yasuhiro Takaya, Taeho Ha, Keiichi Kimura
Author Affiliations +
Proceedings Volume 5662, Fifth International Symposium on Laser Precision Microfabrication; (2004) https://doi.org/10.1117/12.596758
Event: Fifth International Symposium on Laser Precision Microfabrication, 2004, Nara, Japan
Abstract
Stereolithography is one of the Rapid Prototyping and manufacturing technologies which enable to fabricate three dimensional structures easily, quickly and automatically from computer-aided design (CAD) drawing. But it is much difficult to realize microfabrication quickly and accurately using conventional laser-scanning stereolithography due to thick layer of lamination and long time of fabrication. In order to overcome these difficulties, the liquid crystal display (LCD) microstereolthography has been developed in our laboratory, which enable microfabrication of a complete layer by only one irradiation, at high speed as well as high accuracy by continuous laminating of thin layers using the LCD as a live-motion mask. We performed the fundamental experiments to fabricate general 3D micro structure consisting of the overhanging shape using the LCD live-motion mask microstereolithography, and tried to fabricate a microspring with several ten micrometers size as one example.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gohki Oda, Takashi Miyoshi, Yasuhiro Takaya, Taeho Ha, and Keiichi Kimura "Microfabrication of overhanging shape using LCD microstereolithography", Proc. SPIE 5662, Fifth International Symposium on Laser Precision Microfabrication, (8 October 2004); https://doi.org/10.1117/12.596758
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LCDs

Microfabrication

Liquids

Stereolithography

Light sources

3D displays

Solids

Back to Top