Paper
8 October 2004 Reliability of high-power multimode pump modules
Author Affiliations +
Proceedings Volume 5662, Fifth International Symposium on Laser Precision Microfabrication; (2004) https://doi.org/10.1117/12.596363
Event: Fifth International Symposium on Laser Precision Microfabrication, 2004, Nara, Japan
Abstract
Developers building high-power fiber lasers and diode pumped solid state lasers can receive significant benefits in thermal management and reliability by using single emitter multi-mode diodes in distributed pump architectures. This proposed distributed architecture relies on independent single emitter pump lasers and a modest level of pump redundancy. Driving the remaining diodes slightly harder componensates individual diode failures. A model of the ensemble lifetime based on module failure rates and power-scaling factors demonstrates that the distributed pump architecture requires random failure rates corresponding to better than 200,000h mean time between failure (MTBF), which meets typical industrial requirements. A high power, pigtailed, multi-mode pump module suitable for commercial applications is created through this model. Critical elements are based on telecom architectures, including the optical train and the fiber alignment. The module has a low thermal resistance of 4°C/W from the chip-on-sub-mount to the external heat sink, coupling efficiency of over 80% into 0.2 NA, and demonstrated reliable output power of over 5W cw with peak wavelengths near 915 nm. Individual pump modules are predicted to produce 5W cw output power with an MTBF of more than 400,000h. The relationship between anticipated MTBF requirements, test duration and test population is shown.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Silke Pflueger, Richard L. Duesterberg, Victor V. Rossin, Toby Strite, Kuochou Tai, Edmund L. Wolak, Andre W. Wong, Lei Xu, and Erik Zucker "Reliability of high-power multimode pump modules", Proc. SPIE 5662, Fifth International Symposium on Laser Precision Microfabrication, (8 October 2004); https://doi.org/10.1117/12.596363
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reliability

Diodes

Semiconductor lasers

Diode pumped solid state lasers

Fiber coupled lasers

Fiber lasers

Fiber couplers

RELATED CONTENT


Back to Top