Paper
17 May 2005 Wireless low-cost corrosion sensors for reinforced concrete structures
Author Affiliations +
Abstract
The prototype sensors provide a low-cost method to detect the onset of corrosion in concrete structures using a noninvasive approach. The embedded sensors are wirelessly powered by inductive coupling and do not require batteries. Unlike traditional techniques for detecting corrosion which require an electrical connection to the embedded reinforcement, the sensors are self-contained and provide information about the environmental conditions within the concrete in the vicinity of the sensor. The sensors were originally envisioned to provide binary information about the onset of corrosion based on the characteristic frequency of the impedance response. However, more complicated signal processing is required to determine the state of the sensor. The viability of the corrosion sensors is being evaluated through a comprehensive series of laboratory tests using small-scale concrete prisms and large-scale reinforced concrete members.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nathan P. Dickerson, Jarkko T. Simonen, Matthew M. Ardringa, Sharon L. Wood, and Dean P. Neikirk "Wireless low-cost corrosion sensors for reinforced concrete structures", Proc. SPIE 5765, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, (17 May 2005); https://doi.org/10.1117/12.600011
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Corrosion

Switches

Resistance

Inductance

Copper

Environmental sensing

Back to Top