Quality control and health monitoring of aerospace composites via quadrupole resonance

Catherine Ward; Stephanie A. Vierkoetter

doi:10.1117/12.598974

19 May 2005 Quality control and health monitoring of aerospace composites via quadrupole resonance

Catherine Ward, Stephanie A. Vierkoetter

Proceedings Volume 5767, Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites, and Civil Infrastructure IV; (2005) https://doi.org/10.1117/12.598974
Event: Nondestructive Evaluation for Health Monitoring and Diagnostics, 2005, San Diego, CA, United States

Abstract

Techniques for quality control and health monitoring of aerospace composite structures must be reliable, nonintrusive and preferably, non-contacting. Quadrupole resonance (QR) spectroscopy can fill this need. Previously, we have demonstrated that Quadrupole Resonance can be used for nondestructive inspection of polymeric fiber-reinforced composites, which can be exploited for both in-service inspection and on-going structural health monitoring.1-6 In this paper we present an extension of this work, applying the QR method to the quality control of composite parts manufactured via pultrusion. In order to use the QR method for quality control of composite parts they must contain a small amount of tiny crystals of a QR active compound. These crystals are embedded in the part during the manufacture by blending it into the uncured resin. The QR active crystals sense any residual strains that may form inside the part during the manufacturing process. The crystals are interrogated via a single-side coil detector head, which transmits radio frequency (RF) pulses into the composite part. The strain-dependent QR response from the crystals is picked up by the same detector head. The results presented in this paper demonstrate that the QR method is very successful at distinguishing composites parts manufactured under optimal conditions from those that were manufactured with a misaligned die or at reduced temperatures. Both QR frequency and line widths were used as a distinguishing parameter.

Citation Download Citation

Catherine Ward and Stephanie A. Vierkoetter "Quality control and health monitoring of aerospace composites via quadrupole resonance", Proc. SPIE 5767, Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites, and Civil Infrastructure IV, (19 May 2005); https://doi.org/10.1117/12.598974

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available