MEMS mechanical logic units: characterization and improvements of devices fabricated with MicraGEM and PolyMUMPs

Sae-Won Lee; Robert W. Johnstone; Ash M. Parameswaran

doi:10.1117/12.638261

30 January 2006 MEMS mechanical logic units: characterization and improvements of devices fabricated with MicraGEM and PolyMUMPs

Sae-Won Lee, Robert W. Johnstone, Ash M. Parameswaran

Author Affiliations +

Proceedings Volume 6037, Device and Process Technologies for Microelectronics, MEMS, and Photonics IV; 60371A (2006) https://doi.org/10.1117/12.638261
Event: Microelectronics, MEMS, and Nanotechnology, 2005, Brisbane, Australia

Abstract

We are currently developing basic building blocks for creating digital logic units that are based on mechanical components. Transistors, which are semiconductor devices, rely on doping to change intrinsic semiconductor to extrinsic semiconductors. However, at low or high temperatures, that control is impossible as semiconductors revert to intrinsic behaviour. Also, semiconductors exhibit various complications under ionizing (radiation) environment. We have fabricated logic units using micro-mechanical relays using MEMS technology. The logic units consist of a micro-mechanical relay with three electrical gates. The mechanical relay is fabricated with a cantilever over an airgap, and is operated by applying voltage to the gate. The applied voltage creates an electric force between the gate and a cantilever structure. The electrostatic force arches the cantilever into electrical contact. Since the operation does not depend on controlling the type of charge carriers, the proposed method does not suffer from the limitations shared by semiconductors. With different input combinations applied to the gates of the device, development of MEMS mechanical logic, leading to general digital circuits, is possible. Characterization of the devices is performed, which includes operation times, operation voltages, and maximum currents. Design, fabrication and testing of these micro-mechanical logic elements will be presented in the paper.

Citation Download Citation

Sae-Won Lee, Robert W. Johnstone, and Ash M. Parameswaran "MEMS mechanical logic units: characterization and improvements of devices fabricated with MicraGEM and PolyMUMPs", Proc. SPIE 6037, Device and Process Technologies for Microelectronics, MEMS, and Photonics IV, 60371A (30 January 2006); https://doi.org/10.1117/12.638261

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available