Paper
15 February 2006 Fiber-delivery system for high-power UV-A lightsources
Sascha Bohnert, Karl-F. Klein, Dieter Dinges, Wolfgang Fürstenberg, Demetri Kalymnios
Author Affiliations +
Abstract
For medical and analytical applications, thick-core fibers are widely spread. For special applications in the UV-A region, flexible and inexpensive fibers with high transmission in this wavelength region are required. On the other hand, new high-power UV-A light sources (LEDs, laser-diodes) are available in this wavelength region. Although silica-based UV-fibers are mainly used over the full UV-range, there are two additional candidates for the UV-A region: the Polymer Optical Fiber (POF) and the Polymer Clad Silica Fiber (PCSF). Especially, the higher flexibility of the thick-core POF is superior in comparison to silica fibers with the same outer diameter. However, UV-induced losses exist in these fibers, too, using UV-light sources with significant power below 350 nm wavelength. However, the UV-damage with UV-light above this wavelength is significantly reduced; test results with high-power 365 nm UV-LED and 375 nm laserdiodes will be shown and discussed. On the other hand, the entire fiber-optic system, including the light-source, will be characterized. Especially the coupling efficiency between the light-source and the fibers was studied theoretically and experimentally.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sascha Bohnert, Karl-F. Klein, Dieter Dinges, Wolfgang Fürstenberg, and Demetri Kalymnios "Fiber-delivery system for high-power UV-A lightsources", Proc. SPIE 6083, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications VI, 60830T (15 February 2006); https://doi.org/10.1117/12.668027
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase only filters

Optical fibers

Light sources

Signal attenuation

Imaging systems

Polymer optical fibers

Diodes

Back to Top