Paper
16 July 1986 1.3 µm Edge Emitting LEDs for optical communication
A. Ceruzzi, T. Wessel, G. Henein, E. Philipp-Rutz, G. Dougherty
Author Affiliations +
Abstract
In the last years, high quality silica optical fibers have been developed where a reduction in the OH content resulted in a transmission loss lower than 0.5 db/km at a wave length range of 1.3 µm. At M/A-COM LASER DIODE INC., edge emitting InGaAsP/InP double heterostructure LEDs have been developed for this wavelength range that are efficiently coupled to single and multimode optical fibers. Optical Fiber Communication systems employing 1.3 µm edge light emitting diodes (ELEDs) as transmitting sources offer advantages over lasers for both multi and single mode applications. Their reliability is higher, they are less sensitive to changes in temperature or variations of the drive current. Also, their driver circuits are simpler because they do not require optical power monitors. LEDs are not susceptible to external feedback. That is, small feedback signals from coupled fibers or from connectors within the fibers, will not induce any noise. This allows the ELEDs to be desirable sources in the competitive areas of local area networks (LANs), tele-communications systems and local loop distribution networks.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Ceruzzi, T. Wessel, G. Henein, E. Philipp-Rutz, and G. Dougherty "1.3 µm Edge Emitting LEDs for optical communication", Proc. SPIE 0610, Scientific and Engineering Applications of Commercial Laser Devices, (16 July 1986); https://doi.org/10.1117/12.956396
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Optical fibers

Cladding

Interfaces

Multimode fibers

Laser applications

Fiber lasers

RELATED CONTENT


Back to Top