Paper
2 March 2006 Response of a CsI/amorphous-Si flat panel detector as function of incident x-ray angle
Author Affiliations +
Abstract
Two mechanisms for MTF dependence on incident x-ray angle are demonstrated by an experimental technique that separates the two phenomena. The dominant effect is that travel of x-ray photons through the scintillator at non-normal incidence involves an in-plane component. This mechanism leads to a significant but deterministic blurring of the incident image, but has no effect on the noise transfer characteristics of the detector. A secondary effect is that at large angles to the surface normal, x-ray-to-optical conversion occurs at positions in the scintillator further away from the photodiode surface. This leads to a small net decrease in MTF and NPS at angles above 60 degrees. The deterministic character of the angular dependence of gain, MTF and NPS leads to the conclusion that sufficient angular range can be supported by this detector construction. Excellent functionality in the context of tomography is expected.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Eric Tkaczyk, Bernhard Claus, Dinko Gonzalez Trotter, and J. W. Eberhard "Response of a CsI/amorphous-Si flat panel detector as function of incident x-ray angle", Proc. SPIE 6142, Medical Imaging 2006: Physics of Medical Imaging, 61423F (2 March 2006); https://doi.org/10.1117/12.653866
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Sensors

X-rays

Scintillators

X-ray detectors

Data modeling

Signal attenuation

Back to Top