Paper
18 April 2006 Detection methods for absolute laser interferometry
Břetislav Mikel, Ondřej Číp, Josef Lazar
Author Affiliations +
Proceedings Volume 6180, Photonics, Devices, and Systems III; 618006 (2006) https://doi.org/10.1117/12.675642
Event: Photonics, Devices, and Systems III, 2005, Prague, Czech Republic
Abstract
The work is oriented to development of methods for the absolute laser interferometry. The difference between absolute and incremental measurement is described. In the field of the absolute laser interferometry, the linewidth of the laser source limits the maximum measurable distance and the interval of mode-hop free tuning range determines the resolution of the distance measurement. Then, is work is oriented to selection of the primary laser source for the absolute laser interferometry and to determination of its characteristics. Methods of measurements and calculation of basic parameters of the tunable lasers are well described. The method of the absolute laser interferometry with wavelength-scanning interferometry technique improved by an amplitude division of interference fringe was designed and it is described. The Fabry-Perot etalon was designed and it is used to measure the tuning range ofthe laser source.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Břetislav Mikel, Ondřej Číp, and Josef Lazar "Detection methods for absolute laser interferometry", Proc. SPIE 6180, Photonics, Devices, and Systems III, 618006 (18 April 2006); https://doi.org/10.1117/12.675642
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fabry–Perot interferometers

Laser interferometry

Vertical cavity surface emitting lasers

Interferometers

Interferometry

Semiconductor lasers

Diodes

Back to Top