Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene: PCBM photovoltaic devices

Cecilia M. Björström; Svante Nilsson; Kjell O. Magnusson; Ellen Moons; Andrzej Bernasik; Jakub Rysz; Andrzej Budkowski; Fengling Zhang; Olle Inganäs; Mats R. Andersson

doi:10.1117/12.662857

20 April 2006 Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene: PCBM photovoltaic devices

Cecilia M. Björström, Svante Nilsson, Kjell O. Magnusson, Ellen Moons, Andrzej Bernasik, Jakub Rysz, Andrzej Budkowski, Fengling Zhang, Olle Inganäs, Mats R. Andersson

Author Affiliations +

Proceedings Volume 6192, Organic Optoelectronics and Photonics II; 61921X (2006) https://doi.org/10.1117/12.662857
Event: SPIE Photonics Europe, 2006, Strasbourg, France

Abstract

Spin-coated thin films of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (APFO-3) blended with [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) are used as the active material in polymer photovoltaic cells. Such blends are known for their tendency to phase separate during film formation. Tuning the morphology of the blend in a controlled way is one possible road towards higher efficiency. We studied the effect of adding chlorobenzene to chloroform-based blend solutions before spin-coating on the conversion efficiency of APFO-3:PCBM photodiodes, and related that to the lateral and vertical morphology of thin films of the blend. The lateral morphology is imaged by atomic force microscopy (AFM) and the vertical compositional profile is obtained by dynamic secondary ion mass spectrometry (SIMS). The profiles reveal compositional variations consisting of multilayers of alternating polymer-rich and PCBM-rich domains in the blend film spin-coated from chloroform. The vertical compositional variations are caused by surface-directed spinodal waves and are frozen in during the rapid evaporation of a highly volatile solvent. With addition of the low-vapour pressure solvent chlorobenzene, a more homogeneous vertical composition is found. The conversion efficiency for solar cells of this blend was found to be optimal for chloroform:chlorobenzene mixtures with a volume-ratio of 80:1. We have also investigated the role of the substrate on the morphology. We found that blend films spin-coated from chloroform solutions on PEDOT:PSS-coated ITO show a similar compositional structure as the films on silicon, and that changing the substrate from silicon to gold only affects the vertical phase separation in a region close to the substrate interface.

Citation Download Citation

Cecilia M. Björström, Svante Nilsson, Kjell O. Magnusson, Ellen Moons, Andrzej Bernasik, Jakub Rysz, Andrzej Budkowski, Fengling Zhang, Olle Inganäs, and Mats R. Andersson "Influence of solvents and substrates on the morphology and the performance of low-bandgap polyfluorene: PCBM photovoltaic devices", Proc. SPIE 6192, Organic Optoelectronics and Photonics II, 61921X (20 April 2006); https://doi.org/10.1117/12.662857

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available