Paper
7 February 2007 Increased power of broad-area lasers (808nm/980nm) and applicability to 10-mm bars with up to 1000Watt QCW
D. Schröder, J. Meusel, P. Hennig, D. Lorenzen, M. Schröder, R. Hülsewede, J. Sebastian
Author Affiliations +
Abstract
The new packaging technology from JENOPTIK Laserdiode GmbH and the new chip technology from JENOPTIK Diode Lab GmbH increases the output power, the quality and durability of new broad area lasers. Tests with different pulse widths and duty cycles have been conducted. A maximum linear power density of 213mW/&mgr;m has been found for 808nm and 980nm laser, limited by thermal rollover. The tests were performed for duty cycles from 0.1% to 5% and pulse widths of 50&mgr;s and 100&mgr;m. Over 32W output power was reached for 150&mgr;m emitter at a 0.1 % duty cycle and 50&mgr;s pulse length. With the new diode laser technology 10mm bars with a 44% filling factor were produced. These laser bars, mounted on micro channel coolers, reached a maximum output power of 1000W. To our knowledge this is the highest power reported up to now for 980nm material with 100&mgr;s pulses and 0.1% duty cycle.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Schröder, J. Meusel, P. Hennig, D. Lorenzen, M. Schröder, R. Hülsewede, and J. Sebastian "Increased power of broad-area lasers (808nm/980nm) and applicability to 10-mm bars with up to 1000Watt QCW", Proc. SPIE 6456, High-Power Diode Laser Technology and Applications V, 64560N (7 February 2007); https://doi.org/10.1117/12.700021
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Continuous wave operation

Laser applications

Diodes

Packaging

Pulsed laser operation

Epitaxy

Back to Top