Paper
19 February 2008 Effect and control on temperature measurement accuracy of the fiber- optic colorimeter by emissivity of different temperatures
Yu-fang Liu, Xin Han, De-heng Shi
Author Affiliations +
Proceedings Volume 6625, International Symposium on Photoelectronic Detection and Imaging 2007: Related Technologies and Applications; 662522 (2008) https://doi.org/10.1117/12.791240
Event: International Symposium on Photoelectronic Detection and Imaging: Technology and Applications 2007, 2007, Beijing, China
Abstract
Based on the Kirchhoff's Law, a practical dual-wavelength fiber-optic colorimeter, with the optimal work wavelength centered at 2.1 μm and 2.3 μm is presented. The effect of the emissivity on the precision of the measured temperature has been explored under various circumstances (i.e. temperature, wavelength) and for different materials. In addition, by fitting several typical material emissivity-temperature dependencies curves, the influence of the irradiation (radiant flux originating from the surroundings) and the surface reflected radiation on the temperature accuracy is studied. The results show that the calibration of the measured temperature for reflected radiant energy is necessary especially in low target temperature or low target emissivity, and the temperature accuracy is suitable for requirements in the range of 400-1200K.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu-fang Liu, Xin Han, and De-heng Shi "Effect and control on temperature measurement accuracy of the fiber- optic colorimeter by emissivity of different temperatures", Proc. SPIE 6625, International Symposium on Photoelectronic Detection and Imaging 2007: Related Technologies and Applications, 662522 (19 February 2008); https://doi.org/10.1117/12.791240
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Pyrometry

Sensors

Fiber optics

Optical filters

Reflection

Calibration

Back to Top