Paper
25 September 2007 Technical scheme and corresponding experiment for the PAT performance of a lasercom using an integrated test-bed
Author Affiliations +
Abstract
Recent successful demonstrations of laser communications have demonstrated the feasibility of some of the key aspects of this technology. The demonstrations can not success without the full-up ground test and validation. So an integrate test-bed was build in build to test the technical parameters and to verify the working performance for the optical pointing, acquisition and tracking (PAT) of various inter-satellite lasercom terminals. In this paper, we detail the test technical scheme (TTS) and the corresponding experiments. The integrate test-bed is a high quality optical system that will measure the key characteristics of lasercom terminals, such as point error, tracking error, acquisition possibility etc.. The test-bed can operate over the relative wavelength range. Through quantitative tests, the terminal could be optimized base on the test results.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianfeng Sun, Liren Liu, Lijuan Wang, Zhu Luan, De'an Liu, Nan Xu, and Xianghong Zhong "Technical scheme and corresponding experiment for the PAT performance of a lasercom using an integrated test-bed", Proc. SPIE 6709, Free-Space Laser Communications VII, 67091F (25 September 2007); https://doi.org/10.1117/12.731953
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Acquisition tracking and pointing

Optical tracking

Laser communications

Sensors

Integrated optics

Optical scanning

Computer simulations

Back to Top