Paper
26 September 2007 In-situ monitoring of slow light structures in dye-doped polymer waveguide materials
Edward M. McKenna Jr., Andy Lin, Alex Waskiewicz, Alan R. Mickelson
Author Affiliations +
Abstract
In this work, we describe a technique for positioning the passband and monitoring the slowing factor of Moiré gratings written into PMMA-DR1 waveguides during fabrication. Slow light structures made with material platforms such as silicon must fabricated before their actual slowing properties can be measured. In our dye doped polymer waveguides, the slowing can be decided beforehand and the fabrication controlled to achieve the desired performance figure. The resulting group velocity slowing in the composite waveguide can be controlled by varying the index contrast of the grating. In dye-doped polymer materials we use, the index contrast can be changed using the process of irreversible photobleaching. Our technique uses a broadband source to monitor the reflectance spectrum of the grating and the delay of the structure is determined from this measurement. The theory behind the technique is reviewed and results are presented for a Moiré grating written into waveguides fabricated in the dye-doped polymer material system, PMMA-DR1.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Edward M. McKenna Jr., Andy Lin, Alex Waskiewicz, and Alan R. Mickelson "In-situ monitoring of slow light structures in dye-doped polymer waveguide materials", Proc. SPIE 6713, Nanophotonics and Macrophotonics for Space Environments, 67130D (26 September 2007); https://doi.org/10.1117/12.732659
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Fiber Bragg gratings

Reflectivity

Polymers

Slow light

Polymer multimode waveguides

Fabrication

Back to Top