Paper
12 July 2008 Assembly of a Large Modular Optical Telescope (ALMOST)
Author Affiliations +
Abstract
Future space telescope programs need to assess in-space robotic assembly of large apertures at GEO and ESL2 to support ever increasing aperture sizes. Since such large apertures will not fit within a fairing, they must rely on robotic assembly/deployment. Proper assessment requires hardware-in-the-loop testing in a representative environment. Developing, testing, and flight qualifying the myriad of technologies needed to perform such a test is complex and expensive using conventional means. Therefore, the objective of the ALMOST program is to develop a methodology for hardware-in-the-loop assessment of in-space robotic assembly of a telescope under micro-gravity conditions in a more cost-effective and risk-tolerant manner. The approach uses SPHERES, currently operating inside ISS, to demonstrate inspace robotic assembly of a telescope that will phase its primary mirror to optical tolerances to compensate for assembly misalignment. Such a demonstration, exploiting the low cost and risk of SPHERES, will dramatically improve the maturity of the guidance, navigation and control algorithms, as well as the mechanisms and concept of operations, needed to properly assess such a capability.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David W. Miller, Swati Mohan, and Jason Budinoff "Assembly of a Large Modular Optical Telescope (ALMOST)", Proc. SPIE 7010, Space Telescopes and Instrumentation 2008: Optical, Infrared, and Millimeter, 70102H (12 July 2008); https://doi.org/10.1117/12.788566
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical spheres

Space telescopes

Robotics

Telescopes

Optical fabrication

Assembly tolerances

Mirrors

Back to Top