Paper
23 September 2008 Illumination design with virtually reflecting/refracting surfaces
Udo Rohlfing D.V.M., André Domhardt
Author Affiliations +
Abstract
We propose an easy-to-handle method of surface parameterization which is valuable for enhancing the illumination design process. Therefore, an additional normal vector function is provided defining the desired direction of the virtual normal vector at each point of the surface. Hence, the reflection/refraction properties are seperated from the shape of the surface. These surfaces are named Virtually Reflecting/Refracting Surfaces (VRS). This type of surface provides the opportunity to alter the normal direction without changing the shape of the surface and vice versa. Therefore, the designer can have a selective look at those quantities depending mainly on position or on direction. This means that, e.g., one can first prescribe the geometrical shape and adjust the surface's optical properties afterwards. Moreover, structured surfaces, e.g., segmented reflectors, can be replaced in between by virtually reflecting surfaces in order to eliminate discontinuities. This is apparently expedient for improving the convergence in automatic design. We investigate optical layouts with VRS to demonstrate their impact on the design and the optimization process.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Udo Rohlfing D.V.M. and André Domhardt "Illumination design with virtually reflecting/refracting surfaces", Proc. SPIE 7103, Illumination Optics, 710305 (23 September 2008); https://doi.org/10.1117/12.797762
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectors

Detection and tracking algorithms

Differential equations

Light sources

Reflection

Fluctuations and noise

Fresnel lenses

RELATED CONTENT


Back to Top