Modeling and experimental investigations of the sensitivity of piezoresistive chemical sensors based on polyelectrolytic hydrogels

Margarita Guenther; Gerald Gerlach; Thomas Wallmersperger; Volker Schulz

doi:10.1117/12.815274

6 April 2009 Modeling and experimental investigations of the sensitivity of piezoresistive chemical sensors based on polyelectrolytic hydrogels

Margarita Guenther, Gerald Gerlach, Thomas Wallmersperger, Volker Schulz

Author Affiliations +

Proceedings Volume 7287, Electroactive Polymer Actuators and Devices (EAPAD) 2009; 72870U (2009) https://doi.org/10.1117/12.815274
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2009, San Diego, California, United States

Abstract

The application of stimuli-responsive or smart cross-linked gels in chemical sensors is based on their ability to a phase transition under the influence of external excitations (temperature, pH, concentration of additives in water). The external stimulus lowers the energy barrier between two possible gel states: a stable state (shrunk gel) and a metastable state (swollen gel), and thereby makes possible the gel transition into the swollen state. The amount of the solvent absorbed due to the external stimulus has been modeled and calculated taking into account the polymer parameters (concentrations of the hydrophilic, hydrophobic, ionisable and ionised groups as well as polymer cross-linking degree) and the solution parameters (analyte concentration, ionic strength, viscosity as well as temperature and temperature change rate). Combining a smart hydrogel and a micro fabricated pressure sensor chip allows to continuously monitor the analytedependent swelling of a hydrogel and hence the analyte concentration in ambient aqueous solutions. The sensitivity of hydrogels with regard to the concentration of such additives as H+-ions (pH sensor), transition-metal ions and salts in water was experimentally and numerically investigated at different temperatures. It has been demonstrated that the sensor's sensitivity depends on the polymer composition as well as on the polymer cross-linking degree. A higher sensitivity was observed for polyelectrolyte hydrogels with higher concentrations of ionisable groups. The long-term measurements have shown that the lifetime of piezoresistive chemical sensors can be prolonged up to several years provided that specific operation and storage conditions are fulfilled.

Citation Download Citation

Margarita Guenther, Gerald Gerlach, Thomas Wallmersperger, and Volker Schulz "Modeling and experimental investigations of the sensitivity of piezoresistive chemical sensors based on polyelectrolytic hydrogels", Proc. SPIE 7287, Electroactive Polymer Actuators and Devices (EAPAD) 2009, 72870U (6 April 2009); https://doi.org/10.1117/12.815274

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available