Paper
24 February 2010 Development of optical phantoms for use in fluorescence-based imaging
Isabelle Noiseux, Michel Fortin, Sébastien Leclair, Jocelyne Osouf, Ozzy Mermut
Author Affiliations +
Abstract
We fabricated permanent solid polyurethane-based phantoms in which fluorophores were homogeneously incorporated. For this study, fluorophores of three different families were used: Cyanines, Alexa Fluor and Quantum Dots. The goal of this study was to evaluate the impact of casting the fluorophores in a polyurethane matrix on their optical properties, more specifically the absorbance, molecular extinction coefficient, emission of fluorescence and the resultant fluorescence intensity. All measurements were carried out with 5 concentrations of each fluorophores embedded in polyurethane and in solution. Stability over time was also monitored for a three months period. The casting of fluorophores affects the optical properties of the three dyes under study. The max absorbance, the fluorescence emission and intensity along with the molar extinction coefficient were all affected. Quantum dots behave differently to the cyanine and Alexa Fluor dyes. It was also observed that the incorporation of dyes enables long-term stability of the fluorescence signal.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Isabelle Noiseux, Michel Fortin, Sébastien Leclair, Jocelyne Osouf, and Ozzy Mermut "Development of optical phantoms for use in fluorescence-based imaging", Proc. SPIE 7567, Design and Performance Validation of Phantoms Used in Conjunction with Optical Measurement of Tissue II, 75670B (24 February 2010); https://doi.org/10.1117/12.841887
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Luminescence

Polyurethane

Absorbance

Mass attenuation coefficient

Optical properties

Quantum dots

Standards development

Back to Top