Paper
25 November 2009 Spectrally efficient optical CDMA system based on chromatic dispersion for phase coding of individual spectral lines in the time domain
Santiago Tainta, Waldimar Amaya, Maria J. Erro, Maria J. Garde, Raimundo García-Olcina, Miguel A. Muriel
Author Affiliations +
Proceedings Volume 7632, Optical Transmission Systems, Switching, and Subsystems VII; 76320O (2009) https://doi.org/10.1117/12.852197
Event: Asia Communications and Photonics, 2009, Shanghai, Shanghai , China
Abstract
A WDM-compatible spectrally phase encoded-optical CDMA scheme is experimentally demonstrated. The system is based on the use of chromatic dispersion, chosen to achieve a first-order Talbot effect, to obtain a frequency-to-time mapping that allows subsequent coding/decoding of the signal spectrum by applying electro-optic phase modulation in the time domain. Independent coding of each of the spectral lines from a pulsed source is achieved, thus guaranteeing an efficient use of the spectrum. The use of electrooptic modulators to impose the codes enables a simple and rapid reconfiguration of the used codes. Results are given for a system transmitting at 10 Gbps within a 0.7 nm optical window using Hadamard codes.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Santiago Tainta, Waldimar Amaya, Maria J. Erro, Maria J. Garde, Raimundo García-Olcina, and Miguel A. Muriel "Spectrally efficient optical CDMA system based on chromatic dispersion for phase coding of individual spectral lines in the time domain", Proc. SPIE 7632, Optical Transmission Systems, Switching, and Subsystems VII, 76320O (25 November 2009); https://doi.org/10.1117/12.852197
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase modulation

Modulators

Electrooptic modulators

Dispersion

Electro optics

Phased array optics

Solids

Back to Top