Paper
11 October 2010 Research of embedded fiber Bragg grating temperature sensor system
Ji Hu, Shengpeng Wan, Changlin Xie, Zhimin Zhang, Ningning Luo, Shuai He
Author Affiliations +
Abstract
In this article, an embedded fiber Bragg grating temperature sensor system is proposed and researched. The demodulating system controls a Piezoelectric Ceramic (PZT) with sawteeth wave to scan the matching grating, then do photoelectric conversion using a detector, and use Digital Signal Processor (DSP) to find the max intensity. Meanwhile, use PZT drive voltage to control the central wavelength of sensor grating to demodulate. Then use the USB interface chip to realize the communication between DSP and the host computer, and send the collected data to the host computer. Finally, the real time temperature can be inquired and stored through the inquiring interface programmed by computer. The result demonstrates that this experimental system has the wave addressing range from 1540 to 1565 nm and the temperature resolution of 0.1°C.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ji Hu, Shengpeng Wan, Changlin Xie, Zhimin Zhang, Ningning Luo, and Shuai He "Research of embedded fiber Bragg grating temperature sensor system", Proc. SPIE 7656, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 76561S (11 October 2010); https://doi.org/10.1117/12.863852
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Sensors

Control systems

Data conversion

Fiber Bragg gratings

Signal processing

Data processing

RELATED CONTENT


Back to Top