Minimizing actuator-induced errors in active space telescope mirrors

Matthew W. Smith; David W. Miller

doi:10.1117/12.855947

5 August 2010 Minimizing actuator-induced errors in active space telescope mirrors

Matthew W. Smith, David W. Miller

Proceedings Volume 7731, Space Telescopes and Instrumentation 2010: Optical, Infrared, and Millimeter Wave; 773122 (2010) https://doi.org/10.1117/12.855947
Event: SPIE Astronomical Telescopes + Instrumentation, 2010, San Diego, California, United States

Abstract

The trend in future space telescopes points toward increased primary mirror diameter, which improves resolution and sensitivity. However, given the constraints on mass and volume deliverable to orbit by current launch vehicles, creative design solutions are needed to enable increased mirror size while keeping mass and volume within acceptable limits. Lightweight, segmented, rib-stiffened, actively controlled primary mirrors have emerged as a potential solution. Embedded surface-parallel actuators can be used to change the mirror prescription onorbit, lowering mirror mass overall by enabling lighter substrate materials such as silicon carbide (SiC) and relaxing manufacturing constraints. However, the discrete nature of the actuators causes high spatial frequency residual errors when commanding low-order prescription changes. A parameterized finite element model is used to simulate actuator-induced residual error and investigate design solutions that mitigate this error source. Judicious specification of mirror substrate geometry and actuator length is shown to reduce actuator-induced residual while keeping areal density constant. Specifically, a sinusoidally-varying rib shaping function is found to increase actuator influence functions and decrease residual. Likewise, longer actuators are found to offer reduced residual. Other options for geometric shaping are discussed, such as rib-to-facesheet blending and the use of two dimensional patch actuators.

Citation Download Citation

Matthew W. Smith and David W. Miller "Minimizing actuator-induced errors in active space telescope mirrors", Proc. SPIE 7731, Space Telescopes and Instrumentation 2010: Optical, Infrared, and Millimeter Wave, 773122 (5 August 2010); https://doi.org/10.1117/12.855947

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available