Paper
10 February 2011 A novel method of increasing the efficiency of 1064 nm two tone amplifiers through heating of the gain fiber
L. J. Henry, T. M. Shay, D. Hult, K. Rowland Jr.
Author Affiliations +
Abstract
The efficiency of two tone fiber amplifiers can be changed rather significantly by altering the temperature of the external environment surrounding the gain fiber. It is shown experimentally that changes in the temperature of the core of the gain fiber has dramatic effects on the 1064 nm / 1040 nm power distribution in the output of narrow linewidth 1064 nm two tone amplifiers with a greater percentage of the output being 1064 nm at higher core temperatures. By increasing the environmental temperature of the gain fiber from 20 to 80°C, the efficiency of a 1064 nm two tone amplifier can be increased up to 40% with the greatest increases seen in amplifiers seeded hardest in 1040 nm, i.e., having the smallest 1064 nm / 1040 nm seed ratios. This has been attributed to temperature dependence of the absorption and emission cross-sections at the wavelengths of interest. Finally, the temperature of the gain fiber can be used as a design tool to enable a higher efficiency 1064 nm two tone amplifier.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. J. Henry, T. M. Shay, D. Hult, and K. Rowland Jr. "A novel method of increasing the efficiency of 1064 nm two tone amplifiers through heating of the gain fiber", Proc. SPIE 7914, Fiber Lasers VIII: Technology, Systems, and Applications, 79140A (10 February 2011); https://doi.org/10.1117/12.876148
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Temperature metrology

Absorption

Data modeling

Fiber amplifiers

Ytterbium

Silica

RELATED CONTENT

High gain ytterbium doped Ge pedestal large pitch fiber
Proceedings of SPIE (March 12 2014)
Thermal effects of the gradient doping gain fiber in all...
Proceedings of SPIE (November 09 2016)
Alleviate photo darkening by single-mode RMO fiber design
Proceedings of SPIE (February 17 2010)
Unique high-power fiber laser technologies
Proceedings of SPIE (January 12 2005)
10W ASE free single mode high power double cladding ER3+...
Proceedings of SPIE (February 23 2007)

Back to Top