Paper
26 July 2011 Simultaneous measurement of strain and temperature using the FBG cladding modes based on a core misaligned splice
Author Affiliations +
Proceedings Volume 8001, International Conference on Applications of Optics and Photonics; 80013U (2011) https://doi.org/10.1117/12.891422
Event: International Conference on Applications of Optics and Photonics, 2011, Braga, Portugal
Abstract
A fiber optic FBG cladding modes based sensor, for simultaneous measurement of strain and temperature is presented. The FBG cladding modes are efficiently excited by the large core misalignment. This technique enables the possibility to readout simultaneously in reflection the cladding mode (λcl) and the core mode (λco). λcl, λco depend on strain and temperature and show different sensibilities for each parameter, enabling their discrimination. The experimental result shows a good performance in terms of linearity and sensitivity.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Gouveia, P. A. S. Jorge, J. M. Baptista, and O. Frazão "Simultaneous measurement of strain and temperature using the FBG cladding modes based on a core misaligned splice", Proc. SPIE 8001, International Conference on Applications of Optics and Photonics, 80013U (26 July 2011); https://doi.org/10.1117/12.891422
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Fiber Bragg gratings

Temperature metrology

Head

Sensors

Fiber optics

Fiber optics sensors

Back to Top