Paper
30 November 2011 Numerical simulation on fiber Brillouin amplifier
Xiaorui Li, Huaping Gong, Shuhua Li, Jianfeng Wang
Author Affiliations +
Proceedings Volume 8201, 2011 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems; 82010A (2011) https://doi.org/10.1117/12.906943
Event: International Conference on Optical Instruments and Technology (OIT2011), 2011, Beijing, Beijing, China
Abstract
The theory of fiber Brillouin amplifier is investigated by numerical solution combinating interpolation method and Runge-Kutta method. Meanwhile, the most complete characterization and comparison of FBAs for pump power, initial signal power and fiber length is obtained. Through the analysis and comparison, the results show that the amplification efficiency can reach 90% based on the SBS and the most of the power transfer occurs within the first 20% of the fiber length. The output signal power is linear increased with increasing of the initial pump and initial signal, respectively. The high-gain Brillouin amplifier can be obtained when then fiber length is about 26km.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaorui Li, Huaping Gong, Shuhua Li, and Jianfeng Wang "Numerical simulation on fiber Brillouin amplifier", Proc. SPIE 8201, 2011 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems, 82010A (30 November 2011); https://doi.org/10.1117/12.906943
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Optical amplifiers

Signal attenuation

Optical fibers

Fiber lasers

Numerical simulations

Continuous wave operation

Back to Top