Accelerated purge drying to prevent pattern collapse without surfactant rinse for high-aspect ratio resist patterns

Tomohiro Goto; Charles Pieczulewski; Akihiko Morita

doi:10.1117/12.916322

19 March 2012 Accelerated purge drying to prevent pattern collapse without surfactant rinse for high-aspect ratio resist patterns

Tomohiro Goto, Charles Pieczulewski, Akihiko Morita

Author Affiliations +

Proceedings Volume 8325, Advances in Resist Materials and Processing Technology XXIX; 83250S (2012) https://doi.org/10.1117/12.916322
Event: SPIE Advanced Lithography, 2012, San Jose, California, United States

Abstract

We developed a pattern collapse prevention method which does not use a surfactant rinse agent. The pattern collapse phenomenon is commonly expressed by the stress applied on the pattern with key components including "the surface tension of the rinse agent" and "contact angle between pattern surface and rinse agent." Using a surfactant as a rinse agent is targeted at reducing "the surface tension of the rinse agent." The pattern collapse prevention method of focus in this report evaluates the "the drying rate of a rinse agent" and "the accumulated stress on a pattern" in relation to the pattern collapse phenomenon. By increasing the drying rate of the rinse agent, the integrated stress on the pattern is reduced allowing for the pattern collapse prevention. Dramatically speeding-up the drying rate of rinse agent by Accelerated Purge (AP) drying integrated into a photolithography track develop module and without using a surfactant rinse agent we have confirmed the ability to control the pattern collapse phenomenon. With AP drying we have also confirmed further defect reduction that would normally result from rinse agent remaining on a wafer, which has been significantly improved by the super-fast drying process. AP drying is a promising technology which can control pattern collapse phenomenon without using a surfactant rinse agent with advantages in yield improvement, process time reduction and chemical cost reduction.

Citation Download Citation

Tomohiro Goto, Charles Pieczulewski, and Akihiko Morita "Accelerated purge drying to prevent pattern collapse without surfactant rinse for high-aspect ratio resist patterns", Proc. SPIE 8325, Advances in Resist Materials and Processing Technology XXIX, 83250S (19 March 2012); https://doi.org/10.1117/12.916322

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available