The on-board electronics for the near infrared spectrograph and photometer (NISP) of the EUCLID Mission

Leonardo Corcione; Sebastiano Ligori; Favio Bortoletto; Carlotta Bonoli; Luca Valenziano; Rafael Toledo-Moreo; Maurizio D'Alessandro; Massimo Trifoglio; Gianluca Morgante; Carlos Colodro-Conde; Rafael Rebolo-López; Jacinto Muñoz; Isidro Villò

doi:10.1117/12.926004

21 September 2012 The on-board electronics for the near infrared spectrograph and photometer (NISP) of the EUCLID Mission

Leonardo Corcione, Sebastiano Ligori, Favio Bortoletto, Carlotta Bonoli, Luca Valenziano, Rafael Toledo-Moreo, Maurizio D'Alessandro, Massimo Trifoglio, Gianluca Morgante, Carlos Colodro-Conde, Rafael Rebolo-López, Jacinto Muñoz, Isidro Villò

Author Affiliations +

Proceedings Volume 8442, Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave; 844232 (2012) https://doi.org/10.1117/12.926004
Event: SPIE Astronomical Telescopes + Instrumentation, 2012, Amsterdam, Netherlands

Abstract

The Near Infrared Spectrograph and Photometer (NISP) is one of the instruments on board the EUCLID mission. The focal plane array (FPA) consists of 16 HAWAII-2RG HgCdTe detectors from Teledyne Imaging Scientific (TIS), for NIR imaging in three bands (Y, J, H) and slitless spectroscopy in the range 0.9−2µm. Low total noise measurements (i.e. total noise < 8 electrons) are achieved by operating the detectors in multiple non-destructive readout mode for the implementation of both the Fowler and Up-The-Ramp (UTR) sampling, which also enables the detection and removal of cosmic ray events. The large area of the NISP FPA and the limited satellite telemetry available impose to perform the required data processing on board, during the observations. This requires a well optimized on-board data processing pipeline, and high-performance control electronics, suited to cope with the time constraints of the NISP acquisition sequences. This paper describes the architecture of the NISP on-board electronics, which take charge of several tasks, including the driving of each individual HAWAII-2RG detectors through their SIDECAR ASICs, the data processing, inclusive of compression and storage, and the instrument control tasks. We describe the implementation of the processing power needed for the demanding on-board data reduction. We also describe the basic operational modes that will be managed by the system during the mission, along with data flow and the Telemetry/TeleCommands flow. This paper reports the NISP on-board electronics architecture status at the end of the Phase B1, and it is presented on behalf of the Euclid Consortium.

Citation Download Citation

Leonardo Corcione, Sebastiano Ligori, Favio Bortoletto, Carlotta Bonoli, Luca Valenziano, Rafael Toledo-Moreo, Maurizio D'Alessandro, Massimo Trifoglio, Gianluca Morgante, Carlos Colodro-Conde, Rafael Rebolo-López, Jacinto Muñoz, and Isidro Villò "The on-board electronics for the near infrared spectrograph and photometer (NISP) of the EUCLID Mission", Proc. SPIE 8442, Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave, 844232 (21 September 2012); https://doi.org/10.1117/12.926004

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available