Paper
4 June 2014 Experimental testbed for robot skin characterization and interaction control
Kyle R. Shook, Ahsan Habib, Woo Ho Lee, Dan O. Popa
Author Affiliations +
Abstract
Future robot skin will consist of massive numbers of sensors embedded in flexible and compliant elastomer substrate. To test and characterize pressure-sensitive skin prototypes, we have built an experimental testbed capable of applying controlled loading profiles, using the data to create reduced-order models of skin sensors for simulation and control. Measurement data from a load applicator and embedded taxel is acquired using National Instruments real-time control technology. Reduced-order models were proposed to relate the load applied to robot skin to the load sensed by the embedded taxel. Experiments for soft skin material characterization and taxel characterization were also undertaken with the testbed to better understand their nonlinear behavior. With this setup current and future skin sensor designs undergoing a range of loading profiles can be tested and modeled.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kyle R. Shook, Ahsan Habib, Woo Ho Lee, and Dan O. Popa "Experimental testbed for robot skin characterization and interaction control", Proc. SPIE 9116, Next-Generation Robots and Systems, 911606 (4 June 2014); https://doi.org/10.1117/12.2049956
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Skin

Sensors

Silicon

Actuators

Computer programming

Calibration

Motion measurement

Back to Top