Investigation of the influence of the scanning probe on SNOM near-field images using rigorous simulations including the probe

Markus Ermes; Stephan Lehnen; Karsten Bittkau; Reinhard Carius

doi:10.1117/12.2052300

1 May 2014 Investigation of the influence of the scanning probe on SNOM near-field images using rigorous simulations including the probe

Markus Ermes, Stephan Lehnen, Karsten Bittkau, Reinhard Carius

Author Affiliations +

Proceedings Volume 9132, Optical Micro- and Nanometrology V; 91320G (2014) https://doi.org/10.1117/12.2052300
Event: SPIE Photonics Europe, 2014, Brussels, Belgium

Abstract

To investigate light propagation and near-field effects above structured surfaces, scanning near-field optical microscopy is a powerful tool providing access to the near-field intensity. These measurements can be combined with rigorous solving of Maxwell's equations to gain insight into light propagation inside the sample, which is not accessible via experiment. However, we find differences between the intensity distribution obtained via experiment and that observed in the simulation at a constant distance of 20 nm above the surface, which corresponds to the typical surface-to-probe distance in the experiment. A first explanation was given by topographic artefacts [Proc. SPIE 8789, 87890I (2013)]. To better understand the interaction between sample and probe in regard to light propagation, we include the probe in high-resolution simulations of different structures, with the position of the (finite-sized) probe resulting from its placement above each structure. While there is a visible difference in the overall light distribution of the system, caused by the probe, the relative intensity at the position of the probe is shown to be in very good agreement to the intensity in a system without the probe. This has been found for many probe positions along the surface of the structure. This result is applicable to many systems in different fields of research which use such measurements for obtaining information about near-field effects of samples. We show an application for thin-film photovoltaics, where light scattering textured surfaces are used to increase the path length of photons in the absorber layer to increase device performance.

Citation Download Citation

Markus Ermes, Stephan Lehnen, Karsten Bittkau, and Reinhard Carius "Investigation of the influence of the scanning probe on SNOM near-field images using rigorous simulations including the probe", Proc. SPIE 9132, Optical Micro- and Nanometrology V, 91320G (1 May 2014); https://doi.org/10.1117/12.2052300

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Near field scanning optical microscopy

Zinc oxide

Light scattering

Laser induced damage

Low pressure chemical vapor deposition

Interfaces

Coating

Show All Keywords

Keywords/Phrases

Search In:

Publication Years