Paper
1 July 2014 A novel means of measuring non-common path errors in an adaptive optics system
Author Affiliations +
Abstract
A new technique is presented for measuring the phase map due to aberrations in the wavefront-sensor non-common path of an adaptive optics system, for the common architecture in which wavefront-sensor and science paths are split at a dichroic. The underlying technique was originally developed to give absolute surface metrology with laboratory phaseshifting interferometers, correcting in that case for the unknown phase corruption due to imperfections in a transmission flat that contains the reference surface. As applied to an adaptive optics system, the technique makes use of simple mechanical actuation, normally available for pupil alignment, to isolate errors up- and down-stream of the dichroic. With auxiliary phase-diversity data from the science path, flexure-induced phase errors within both non-common paths may be characterized, yielding information about the temporally persistent speckles they are thought to produce.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
E. E. Bloemhof "A novel means of measuring non-common path errors in an adaptive optics system", Proc. SPIE 9148, Adaptive Optics Systems IV, 91485E (1 July 2014); https://doi.org/10.1117/12.2056413
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Wavefront sensors

Mirrors

Adaptive optics

Wavefronts

Phase measurement

Cameras

Optical testing

Back to Top