Paper
12 March 2015 Nanosecond laser-induced ablation and laser-induced shockwave structuring of polymer foils down to sub-μm patterns
P. Lorenz, L. Bayer, M. Ehrhardt, K. Zimmer, Lutz Engisch
Author Affiliations +
Abstract
Micro- and nanostructures exhibit a growing commercial interest where a fast, cost-effective, and large-area production is attainable. Laser methods have a great potential for the easy fabrication of surface structures into flexible polymer foils like polyimide (PI). In this study two different concepts for the structuring of polymer foils using a KrF excimer laser were tested and compared: the laser-induced ablation and the laser-induced shock wave structuring. The direct front side laser irradiation of these polymers allows the fabrication of different surface structures. For example: The low laser fluence treatment of PI results in nano-sized cone structures where the cone density can be controlled by the laser parameters. This allows inter alia the laser fabrication of microscopic QR code and high-resolution grey-tone images. Furthermore, the laser treatment of the front side of the polymer foil allows the rear side structuring due to a laserinduced shock wave. The resultant surface structures were analysed by optical and scanning electron microscopy (SEM) as well as white light interferometry (WLI).
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Lorenz, L. Bayer, M. Ehrhardt, K. Zimmer, and Lutz Engisch "Nanosecond laser-induced ablation and laser-induced shockwave structuring of polymer foils down to sub-μm patterns", Proc. SPIE 9351, Laser-based Micro- and Nanoprocessing IX, 935119 (12 March 2015); https://doi.org/10.1117/12.2079434
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Polymers

Scanning electron microscopy

Excimer lasers

Laser processing

Laser damage threshold

Image processing

Back to Top